Product ID:3M EC-776 FUEL RESISTANT COATING
MSDS Date:01/01/1990
FSC:8040
NIIN:00-266-0824
MSDS Number: BJQQB

3M CO. AEROSPACE MATERIALS DEPT

3M CENTER
ST. PAUL, MN 55144-1000
US

Emergency Phone: 612-733-1110

Info Phone: 612-733-1110

Cage: 0KHE3

MINNESOTA MINING AND MFG CO AEROSPACE MATERIALS DEPT

SAINT PAUL, MN 55144-1000 US

Telephone: 612-737-4114/612-733-1110

Cage: 0KHE3

METHYL ISOBUTYL KETONE (SARA III)

CAS: 108-10-1

RTECS: SA9275000

Fraction By Weight: 60-70%

OSHA PEL 100 PPM/75 STEL

ACGIH TLV: 50 PPM/75 STEL; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

PHENOL FORMALDEHYDE POLYMER

CAS: 9003-35-4

Fraction By Weight: 10-20%

ACRYLONITRILE-BUTADIENE POLYMER

CAS: 9003-18-3

Fraction By Weight: 10-20%

ETHYL ALCOHOL (ETHANOL)

CAS: 64-17-5

RTECS: KQ6300000

Fraction By Weight: 1-10%

OSHA PEL 1000 PPM

ACGIH TLV: 1000 PPM; 9192

METHYL ALCOHOL (METHANOL) (SARA III)

CAS: 67-56-1

RTECS: PC1400000

Fraction By Weight: 0.1-1%

OSHA PEL S,200PPM/250STEL

ACGIH TLV: S,200PPM/250STEL; 93

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

ETHYL ACETATE (SARA III)

CAS: 141-78-6

RTECS: AH5425000

Fraction By Weight: 0.01-1%.

OSHA PEL 400 PPM

ACGIH TLV: 400 PPM; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

647

RTECS: 9999999VO

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:EYE: LIQUID & VAPOR MAY CAUSE SEVERE
EYE IRRITATION. SYMPTOMS INCLUDE EDEMA, REDNESS, TEARING, BURNING
SENSATION AND BLURRED VISION. SKIN: MAY CAUSE IRRITATION ON
PROLONGED OR REPEATED CONTACT. MAY PR ODUCE ROUGH, RED, DRY SKIN
WITH PROLONGED EXPOSURE. INHALE: VAPOR OVEREXPOSURE MAY CAUSE
RESPIRATORY SYSTEM IRRITATION*
Effects of Overexposure:*& LIGHT-HEADEDNESS. METHYL ISOBUTYL KETONE
(MIBK) VAPORS MAY CAUSE LIVER & KIDNEY DAMAGE ON REPEATED EXPOSURE.
SYMPTOMS OF OVEREXPOSURE INCLUDE HEADACHE, DIZZINESS, WEAKNESS,
FATIGUE & ON EXTREME OVE REXPOSURE UNCONSCIOUSNESS. INGEST: MAY
CAUSE DIGESTIVE SYS IRRIT & VOMITING. ASPIRATION TO LUNGS CAUSES
LUNG DAMAGE.

First Aid:EYE: IMMEDIATELY FLUSH EYES WITH PLENTY OF WATER FOR AT LEAST
10 MINUTES AND CALL A PHYSICIAN. SKIN: WASH WITH SOAP AND WATER.
INHALE: REMOVE PERSON TO FRESH AIR. CALL A PHYSICIAN. INGEST: DO
NOT INDU CE VOMITING. IMMEDIATELY CALL A PHYSICIAN OR POISON
CONTROL CENTER.

Flash Point:50.0F,10.0C
Lower Limits:1.4
Upper Limits:19
Extinguishing Media:CO2, FOAM, DRY CHEMICALS
Fire Fighting Procedures:FIRE FIGHTERS SHOULD BE EQUIPPED WITH
SELF-CONTAINED BREATHING APPARATUS WHEN FIGHTING FIRES INVOLVING
THIS MATERIAL.
Unusual Fire/Explosion Hazard:FLAMMABLE. OVERHEATED, CLOSED CONTAINERS
ADJACENT TO FIRE COULD EXPLODE DUE TO PRESSURE BUILDUP.

Spill Release Procedures:EXTINGUISH ALL IGNITION SOURCES. VENTILATE THE
AREA. OBSERVE PRECAUTION. CONTAIN THE SPILL. COVER SPILL WITH
ABSORBENT MATERIAL AS NEEDED. COLLECT THE SPILLED MATERIAL USING
NON-SPARKING TOOLS. PLACE IN A U.S. D.O.T. APPR'D METAL
CONTAINERAND SEAL.

Handling and Storage Precautions:FOR INDUSTRIAL OR PROFESSIONAL USE
ONLY. KEEP AWAY FROM HEAT, SPARKS, FLAME AND OTHER SOURCES OF
IGNITION. KEEP CONTAINER CLOSED WHEN NOT IN USE.

Respiratory Protection:AVOID PROLONGED BREATHING OF VAPORS.
Ventilation:USE WITH SUFFICIENT VENTILATION TO MAINTAIN VAPOR/SPRAY
CONCENTRATIONS BELOW RECOMMENDED EXPOSURE LIMITS.
Protective Gloves:IMPERVIOUS GLOVES
Eye Protection:CHEMICAL SAFETY GOGGLES/FULL FACESHIELD
Work Hygienic Practices:AVOID CONTACT WITH EYES AND SKIN. WEAR EYE AND
SKIN PROTECTIVE EQUIPMENT WHEN HANDLING THIS MATERIAL.
Supplemental Safety and Health
VAPORS/SPRAY RELEASED BY THIS MATERIAL CAN BE IGNITED EASILY.

HCC:F5
Boiling Pt:B.P. Text:164F,73C
Vapor Pres:42.1
Vapor Density:3
Spec Gravity:0.88
Viscosity:CA 950 CST
Evaporation Rate & Reference:> 5 (ETHER=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:TRANSPARENT AMBER, THIN LIQUID, CHARACTERISTIC
KETONE ODOR
Percent Volatiles by Volume:74(WT)

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:CO, CO2, N, FORMALDEHYDE AND SMOKE
PARTICLES WHEN SUBJECTED TO EXCESSIVE HEAT OR FLAME.

Waste Disposal Methods:INCINERATE ABSORBED AND BULK PRODUCT AFTER
MIXING WITH FLAMMABLE MATERIAL IN A LICENSED HAZARDOUS WASTE
FACILITY. DISPOSAL SHOULD BE IN ACCORDANCE WITH APPLICABLE
REGULATIONS. US EPA HAZAROUS WASTE NO : D001 (IGNITABLE).

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.